Header Picture
Empresa
Indústria Alimentar
Indústria Cosmética
Indústria Detergencia
Indústria Dietética
Indústria Farmacêutica
Biocidas
Principais Representadas
Contacte-nos
Procurar
criar PDF versão para impressão enviar por e-mail
                                     LIQUAPAR® OIL

Description
INCI: Isopropylparaben (and) Isobutylparaben (and) Butylparaben
Typical Properties
Appearance Clear, viscous liquid
Color, APHA 250 maximum
Isopropylparaben 37 - 43%
Isobutylparaben 27 - 33%
n-Butylparaben 27 - 33%
Total Parabens 97.0% minimum
Solubility
Solvent LiquaPar Oil (%)
Methanol Completely miscible
Propylene Glycol Completely miscible
Glycerin 0.8
1,3-Butylene Glycol >1
Castor Oil >1
Soybean Oil >1
C12 - 16 Alkyl Benzoate >1
Isopropyl Myristate >1
Lanolin Oil >1
Mineral Oil <0.1
Hydrogenated Polybutenes <0.1
Petroleum Distillates <0.1
Water (10°C) <0.1
Water (25°C) <0.1
Water (80°C) <0.1
LiquaPar Oil is a 100% active, clear, stable, liquid blend of Isopropyl, Isobutyl, and n-Butyl esters of Parahydroxybenzoic Acid. This unique combination of parabens is a very effective preservative against Gram-positive bacteria, yeast, and mold. The higher alkyl esters present in LiquaPar Oil are not only more active but also more stable and resistant to hydrolysis than traditional lower alkyl powder parabens. It does not contain halo-organic components, formaldehyde, or formaldehyde releasers. LiquaPar Oil minimizes problems of grittiness or crystallization often associated with the use of individual powder parabens and it can be readily incorporated into many types of cosmetic formulations without heating.

LiquaPar Oil is approved for use worldwide. It is approved for use in the Americas and permanently listed up to 0.8% without restriction in the European Union. In Japan, LiquaPar Oil is permitted up to a maximum total paraben concentration of 1.0%.
Applications
Useful in a wide range of cosmetic formulations including anhydrous systems.
Recommended use level of 0.4-0.8%.
For best results, LiquaPar Oil can be added pre- or post-emulsification, in systems with a pH range of 3.0-7.5.
Studies indicate that many fragrances are miscible in LiquaPar Oil thereby facilitating their incorporation into finished products.
Every cosmetic formulation requires a specific preservative system to meet its individual needs. Therefore, every newly developed or modified product should be challenge tested to assure preservative efficacy.

LIQUAPAR® OIL is a Registered Trademark of International Specialty Products.

Copyright © 2006 International Specialty Products. All Rights Reserved.
 
© 2013 Grisquimica, Produtos Químicos Lda
Joomla! is Free Software released under the GNU/GPL License.